GYBR Trippy Space Hoodie: Sizing, Print Care and Styling

By Elton John Official Store - Elton John Official Store | Published: 2026-11-01

Category: Tips & Care

Keep the GYBR Trippy Space Hoodie's double-sided print sharp with a simple wash-and-wear routine, plus fit and styling notes for everyday use.

Quick answer

Wash the GYBR Trippy Space Hoodie inside out in cold water on a gentle cycle, then hang it to dry. That routine protects both the front emblem and the large back print, and it keeps the white fabric from dulling.

Why the back print needs extra attention

The GYBR Trippy Space Hoodie carries graphics on both sides: a circular Elton John/Goodbye Yellow Brick Road emblem on the front and a psychedelic illustration of Elton John walking onto the Yellow Brick Road on the back. Large back prints sit directly against chairs, car seats, and bag straps, so they collect friction that smaller chest prints avoid. Turning the hoodie inside out before washing and drying reduces that abrasion and helps the print stay smooth.

Fit check before your first wash

This is a pullover hoodie with a white base, and the catalog lists size as the only option. Because no fabric blend or shrinkage specification is provided, treat the first wash as a test: measure the hoodie flat before laundering and again after it dries. If you prefer a relaxed fit, size up rather than relying on the hoodie to stretch. If you want a closer fit, choose your usual size and avoid high heat, which can shrink cotton-rich knits.

Step-by-step care and styling routine

1. Turn inside out and check the print: Before washing, turn the hoodie inside out and inspect the front emblem and back illustration for cracks or lifting. Fasten any drawcords and close zippers on other garments to prevent snags. A quick pre-wash check catches damage before the machine makes it worse.
2. Wash cold on a gentle cycle: Use cold water and a mild detergent on a gentle or delicate cycle. Avoid fabric softener and bleach, which can break down print adhesives and dull the white fabric. Cold water and mild detergent are the two settings that matter most.
3. Skip the dryer: Hang the hoodie to dry in the shade, reshaping it while damp. If you must use a dryer, choose the lowest heat setting and remove the hoodie while it is still slightly damp. Heat is the main cause of cracked prints and unexpected shrinkage.
4. Iron with care: If wrinkles bother you, iron the hoodie inside out on a low setting and never place the iron directly on the printed areas. A pressing cloth adds another layer of protection. Direct iron contact can melt or gloss the print surface.
5. Style around the double-sided graphic: Let the back print be the focus: wear the hoodie with plain jeans or joggers and keep jackets unbranded so the Yellow Brick Road illustration stays visible. For a layered look, choose an open overshirt that does not rub against the back print. Simple bottoms and smooth outer layers keep attention on the graphic and reduce friction.

Product facts

GYBR Trippy Space Hoodie: White pullover hoodie with a front circle emblem and a large psychedelic back print. Two print areas mean you need to protect both sides, especially the back, during washing and wearing.
GYBR Trippy Space Hoodie